fertito's Blog

Hello,if like myself you push the thing a little too far, you should find this usefull ;)If nothing is responding anymore on your router :locate the GND, TX and RX on the board :http://www.fertito.net/dotclear/public/cortex/wr703n.jpg solder some wire on it, this is very difficult, because it is really small and the solder doesn't stick well on it. On...

Hop!Now that your system is Up and runing, it is time to add some video broadcasting, the wr703n can handle an USB Webcam with uvc driver.I choose this one :http://www.ascendtech.us/mmASC/Images/LTPRO9000.JPG The logitech pro 9000, it is able to handle HD 720 (low rate...) and has a really good sensibility (was a little amazed...).I removed all the pl...

Hello,now that you have a wr703n runing on openwrt, it is time to put some software on it and eventually make some addon.the fact is : there is not much place on the router to make everything fit...the solution I recommand : Add a USB Hub, to be able to plug not only the openpilot board, but also the webcam, and an usb flashdrive to make a system overlay...

Hello,here is the first part of a tutorial to hack and tune a small wifi/3G router to be able to broadcast the telemetry of your favorite copter control board ;)1. Get a wr703n  http://wiki.reseauli...-WR703N_eth.jpg You'll find it on every good chinese online store, mine come from lightake but it can be found on dealextreme, ...if you...