Jump to content


Blogs



Photo

QAV400: Blackout Build

Posted by ncaldwell in QAV400: Blackout Build, 19 May 2013 · 60 views
qav, 400, qav400, cc3d

Inspired by all the great QAV400 builds, I decided to take my newly purchased kit and customize!

Wanna give thanks to:
Tim for fast shipping on an stellar product that justifies the $170 price tag
Juz (of course)
Blueprint's awesome build helped me out every step
Travis took it to the next level with his red accents


So here's the objective: Take all th...
Read Full Entry →
4 Comments

Photo

My First Quad

Posted by paulj in paulj's Blog, 19 May 2013 · 50 views

My First Quad I have finally bought all the parts for my first quad, and last night I was up to 2am building it!

Details:
HobbyKing SK450 Glass fibre quad
4 x Turnigy Plush 18A speed controllers, not flashed (yet!)
Slow Fly electric props: 8x4.5
Turnigy Aerodrive SK3 - 2822-1090kv outrunner motors
Quadpower distribution board, from eBay
1800mAh 3s lipo
Multiplex 2.4GH...
Read Full Entry →
0 Comments

Photo

Journal d'un débutant #9

Posted by thierry.bugeat in Thierry Bugeat's Blog, 18 May 2013 · 28 views

18/05/2013 La soudure ... ma passion !
Après avoir bien galéré à souder les prises sur la CC3D (Journal #2 ), cette fois-ci c'est pour connecter les ESCs à la carte CC3D que je me fais violence.

Les fournitures pour l'opération :
Gaine thermorétractable
Fils électriques ( Récupérés sur un viel ordinateur et sur un vieux servo )
Colliers en plastique...
Read Full Entry →
0 Comments

Photo

Update

Posted by TomSn0w in TomSn0w, 17 May 2013 · 25 views


Read Full Entry →
0 Comments

Photo

HRLV-MaxSonar MB1003 High Resolution Ultrasonic Range Finder

Posted by Jurek in Jurek's Blog, 15 May 2013 · 68 views

Hello Friends,

Today i had a chance to test the HRLV-MaxSonar MB1003 High Resolution Ultrasonic Range Finder. Got it for 25GBP from a local supplier.



The interest in this component comes from a very nice specification and some good (astroturfed) reviews of it on the web. It is specified to 1mm accuracy when the 2Hz filter is enabled, and 2-5mm accura...
Read Full Entry →
0 Comments

Photo

black tongue

Posted by salade in salade's Blog, 14 May 2013 · 65 views

so, my little home baked quad  has taken a real beating the last few months while i've been learning to fly FPV, been a really good little flyer but it's not as precise as i want it to be any more, everything's bent and hanging in there with cable ties, really sloppy.

i wanted a new frame, but, i'm a real tight ass, my haircut will tell you that(kitchen...
Read Full Entry →
1 Comments

Photo

Building a Backpack Groundstation for FPV

Posted by friesianflyer in friesianflyer's Blog, 09 May 2013 · 175 views
groundstation, FPV, 2.4GHz

After being inspired by many other backpack groundstations, I abandoned my plan for a tripod mounted, or flightcase mounted groundstation, and decided to [s]blatantly copy  draw on other's experience....... ;)

I decided to use 5mm foamboard for the backplate, due to:

1. It is lightweight
2. It is easy to cut and drill
3. I had some in the garage.........
Read Full Entry →
5 Comments

Photo

CC3D in a Hoverthings FLIP FPV frame

Posted by Murphys_Law in Murphys_Law's Blog, 09 May 2013 · 115 views
CC3D FLIP FPV

I finally had time to build a quad based on my kickstarter cc3d that I received last December. I selected the Hoverthings Flip FPV because I wanted a sturdy frame that could accommodate a FPV setup.

The current configuration uses the following components

CC3D flight controller
Hoverthings FLIP FPV frame
Hobbywing Skywalker Quattro 4X20A ESC
EzOSD TBS ed...
Read Full Entry →
0 Comments

Photo

my flight controller

Posted by cctsao1008 in cctsao1008's Blog, 06 May 2013 · 185 views
Controllers

https://lh5.googleus...54/DSC_0192.jpg

https://lh4.googleus...54/DSC_0193.jpg
6 Comments

Photo

No! Tri not. Do, or do not. There is no tri!

Posted by PeteTheRanger in PeteTheRanger's Blog, 06 May 2013 · 107 views

....with apologies to Master Yoda...


It flies! Woooot!



I will install a CC3D as soon as I can extract it from my Bixler.

Mostly happy with it - I did meet most of the design goals - namely that she'd carry the GoPro on it's case and also a reasonable flight time (10 minutes achieved).



She's kind of fat - 1539 grams!



A few LEDs so that my...
Read Full Entry →
2 Comments

Photo

Hexacopter CC

Posted by martin in martin's Blog, 05 May 2013 · 54 views

Not in english. Excuse me.

Основными идеями при проектировании нового коптера были:
1. Ноги и крылья должны складываться. (ибо предыдущая гекса с трудом влезала в машину).
2. Избавиться, насколько это возможно, от высокочастотной тряски коптерного мозга. (Используя демпфирующие резинки в креплениях крыльев, и креплением мозгов к площадке аккумуляторов. П...
Read Full Entry →
0 Comments

Photo

TBS Discovery PID settings

Posted by janh in janh's quad log, 26 April 2013 · 135 views

Just wanted to post up some PID settings, these are my first pass rough tuning for a TBS Discovery Frame, Birddog 900kv motors on 4S spinning 9x5 Birddog props, with FPV gear onboard but without a GoPro.


Read Full Entry →
0 Comments

Photo

FPV Backpack Groundstation v3.0 #2

Posted by The RevKev in The RevKev's Blog, 18 April 2013 · 253 views

So progress is slow as I am working with my engineer brother-in-law on the design.  He is drawing it up for me in SolidWorks and we are working on a first modeling of the station.

Included are some pics of what it will look like with 2D scale cutouts of the components that will go in the station.  I need time to cut out more foam to make them 3D so we ca...
Read Full Entry →
2 Comments

Photo

Going '3D' (Just4fun)

Posted by neBstress in neBstress's Blog, 15 April 2013 · 182 views

Going '3D'  

One of the test Quad's with CopterControl on board:

http://forums.openpi...373_thumb.jpg

http://forums.openpi...374_thumb.jpg

http://forums.openpi...76_thumb.jpg...
Read Full Entry →
2 Comments

Photo

Coaxial helicopter Big Lama with CC3D

Posted by slv in slv's Blog, 12 April 2013 · 184 views
Coaxial helicopter, ESKY and 4 more...

This is testing for my upgrade coaxial helicopter with CC3D:
The base heli was ESKY Big Lama. It's with brushless motors now.

Sorry for the video quality.

Testing with max settings of roll-pitch 20°.    
Only one rotor have CC3D management by 2 servos.
The upper rotor is fixed with screws.

And a some fun with:...
Read Full Entry →
5 Comments

Photo

Dave's Rc explorer tri build

Posted by thefokker in thefokker aka Dave's Blog, 07 April 2013 · 265 views
Tricopter

Dave's Rc explorer tri build I decided to take the plunge with a tri copter finally. I have found the kits available are either incomplete, or need the hardware replaced/modded. So I went with stuff I had in my garage already.

Some wood, metal, and hking nose gear for yaw mech.

Thanks to rcexplorer for sharing his builds.

I've flown it 2 times fpv and a few crazy Los flights. I...
Read Full Entry →
9 Comments

Photo

FPV and Joystick

Posted by muralha in muralha's Blog, 30 March 2013 · 271 views

Finally tried FPV.

Test 1  - FPV with TX
Test 2  - FPV with Joystick (OPLink connection)



Info:
Quad with CC3D
Default PIDs
Unbalanced props... (do the harlem shake)
3.5" LCD with 16:9 cropped... (something missing up and down…)
[s]2.6mm  3.6mm lens... (very narrow view to fly a quad...)
and I think the camera is out of focus...
6 Comments

Photo

Step 5 - Make a Few Mods...

Posted by YouMadeMeDoIt in Second Quadcopter Build - Jago's Heavy Lift, 23 March 2013 · 258 views

Just made a few mods on the Jago Heavy Lifter!

I re-attached the front servo arms via heavy rubberized mounts, and scratch designed some new landing gear that will hold the copter precisely 4" off the ground to make room for my lowered camera mount.

If anyone wants the landing gear, they were 3D printed by Polakium Engineering  and ran me around $42 shi...
Read Full Entry →
2 Comments

Photo

Comeing soon THE RDX4 FPV Frame

Posted by tech69x in tech69x's Blog, 27 February 2013 · 652 views
New frame

And here it is
3 Comments

Photo

Adding a CC3D to an Assassin Flying Wing

Posted by boonzie in Boonzie's Blog, 23 February 2013 · 662 views
CC3D, fixed wing, flying wing and 1 more...

So a mate and I bought a 3 pack of Crash Test Hobbies 34” Assassin flying wings to get back into flying planes after a 20+ year absence (we used to build/crash/fix balsa gliders). We figured buying an EPP 'indestructible' combat wing might be a good place to start after watching videos of the Assassin crash into brick walls at high speed and just bounce o...
Read Full Entry →
0 Comments



4 user(s) are online (in the past 30 minutes)

0 members, 4 guests, 0 anonymous users

  1. OpenPilot Forums
  2. → Community Blog List
  3. Privacy Policy