Recent Entries 
-
From: Bashing CC3D TWL Style :)Enthlapy's Blog
17 April 2012 -
UAP1 Y6kevinv033's Blog
16 March 2012 -
Android DevelopmentPT_Dreamer's Blog
10 March 2012 -
InspirationSilli's Blog
04 March 2012 -
-
Post #1 - Multirotor #1 - Center PlatesScott V's Build Blog
02 March 2012 -
The Devil Made Me Do Itfmlive's Blog
01 March 2012 -
Frame design ObjectivesSilli's Blog
29 February 2012 -
List of PartsSilli's Blog
29 February 2012 -
Introduction and objectiveSilli's Blog
29 February 2012
It's about time I finally post an official entry for my UAP1. I have been using this since November in various configurations. It started as a flat hexa, then a quad, I briefly tried a "spider" quad. It's currently a Y6 with Avroto 2814-11 motors and APC 10x4.7 (sometimes 11x4.7) props. Those are controlled by RapidESC 30A ESC... Read Full Entry
Android resources:
Hello World
http://developer.and...ello-world.html
Google map API
http://developer.and...lo-mapview.html
Android development and Eclipse... Read Full Entry
Hello World
http://developer.and...ello-world.html
Google map API
http://developer.and...lo-mapview.html
Android development and Eclipse... Read Full Entry
As I am now in the process of designing my frame, I would like to go over some of my favorite designs and look at what inspiration we can draw from each one of them.
First I would like to say that I am a total newby in the field and I am currently building my first Quad. So many (if not all) my points could be total bologny. However, since I... Read Full Entry
First I would like to say that I am a total newby in the field and I am currently building my first Quad. So many (if not all) my points could be total bologny. However, since I... Read Full Entry
Got these 1/2" 250mm aluminum arms off eBay for about $1 each. Not easy to find tube aluminum locally and to ship it from Mcmaster-Carr or other supply type place is pricey. Not being in any hurry, I waited for the slow boat to bring these. 3mm hardware with elastic stop nuts. Tried to get SS at the WRAM show from the... Read Full Entry
This blog is intended as a sharing experience. Maybe someone will get an idea from this, or will share an idea for improvements that I can make. As a newbie I feel I need all the help I can get.
The name chosen is appropriate because I am a newbie who already has a quad flying. The lure of building another just could not be contained. My... Read Full Entry
The name chosen is appropriate because I am a newbie who already has a quad flying. The lure of building another just could not be contained. My... Read Full Entry
This is where we left off. This is a side view of the CC board. We are looking from the back of the quad. You can see the battery terminal and the ESC's residing between the bottom plate and middle plate. Also gives a pretty good look at the grommets isolating the CC board and an idea of the spacing that the... Read Full Entry
Found major bug in my hardware!
I found that I have no YAW cahnge at all. Started to check the board. And finally foun that the 20 pin of isz-500 was cold soldered. I soldered it once more. After it the YAW started to work correct. Still didn't checked it in the air. Read Full Entry
I found that I have no YAW cahnge at all. Started to check the board. And finally foun that the 20 pin of isz-500 was cold soldered. I soldered it once more. After it the YAW started to work correct. Still didn't checked it in the air. Read Full Entry
Ok, so at this point I am cramming the last few steps together after receiving my motors from Hobby King in China. At the time I am writing this I have already accomplished my maiden flight/crash test. Basically, these are the final steps I took prior to getting her out and in the air:
1. Mounted motors - I used 2 sheets of some tub lining... Read Full Entry
1. Mounted motors - I used 2 sheets of some tub lining... Read Full Entry
В общем получив плату СС, сразу же, установил плату на простенькую раму, квадро, запустил-полетело.
Хорошо полетело. Приятно, маслянно.
В скором времени к прошивке-добавили опцию стабилизации... Read Full Entry
Хорошо полетело. Приятно, маслянно.
В скором времени к прошивке-добавили опцию стабилизации... Read Full Entry
Quite often I am asked on forums: "Why don't you have this feature?". Some of requests can be handled using officially released firmware and software. But there are some which have strong demand, obvious reasons, but aren't addressed in the official OpenPilot firmware. Moreover, some of them will never be included into... Read Full Entry
Совершенно случайно в результатах поиска Google наткнулся на одну из веток обсуждения проекта на российском сайте rcdesign.ru. К своему удивлению увидел в ней, как народ старательно и успешно... Read Full Entry
Закончил постройку микроквадрокоптера
My blog entry with video (rus)
Полетный вес 130гр
Read Full Entry
My blog entry with video (rus)
Полетный вес 130гр
Read Full Entry
Забежал в Эпицентр, посмотрел на цены на алюминиевый профиль.
Price for alu. 1$ US = 8 Ukrainan hrivna. Read Full Entry
Price for alu. 1$ US = 8 Ukrainan hrivna. Read Full Entry
I have been doing continual testing on the camera stabilization with the Copter Control board. The major issue is the performance of the camera gimbal. The GoPro is fairly simple and Jakub's gimbal is working well especially with two Savox servos.
However for the Sony Nex 5 and 5N cameras there is no really good small gimbal on the market... Read Full Entry
However for the Sony Nex 5 and 5N cameras there is no really good small gimbal on the market... Read Full Entry
// Final assembly
Take-off weight: 825g
Copter: 645g (will be less when I remove overhang from the... Read Full Entry
Take-off weight: 825g
Copter: 645g (will be less when I remove overhang from the... Read Full Entry
Sorry, no comments for this model or video. Just OpenPilot CopterControl at work! Weight without battery is 160g (5,64 oz).
Прошу прощения, для этой модели или видео не последует комментариев. Просто OpenPilot CopterControl в работе! Вес модели без батареи 160 грамм.
Read Full Entry
Прошу прощения, для этой модели или видео не последует комментариев. Просто OpenPilot CopterControl в работе! Вес модели без батареи 160 грамм.
Read Full Entry
- 42 Total Blogs
- 72 Total Entries
- 137 Total Comments
- A*Morale's Blog Latest Blog
- A*Morale Latest Blogger
1 user(s) are online (in the past 30 minutes)
0 members, 1 guests, 0 anonymous users
