Hello all. I'm new here. Been lurking for a while, trying to get my head around everything. I've not built anything yet, I'm just in the planning stages. I have a little (very little) fixed wing RC experience and am learning heli RC right now. I know nothing about coding and I have just enough electronic knowledge to be dangerous. I do however like to read and am pretty good at spelling, etc. In other words....I'd like to help with the Wiki or any other documentation that needs it. Dankers says someone needs to take ownership on key pages....I'm not exactly sure what that means, but I'd probably be willing to do that. My problem is, like just about everything else here, it's all over my head. Someone point me in the right direction and tell me how to do what needs done and I'm your man. Sorry about the long post, just trying to intro myself.
3
General Task list for the project
Started by dankers, Feb 07 2010 03:09 PM
24 replies to this topic
#21
GeeBee
-
- Members
-
- 14 posts
Member
- LocationHebron, Ohio
-
Country:
United States
Posted 22 November 2011 - 01:55 PM
#22
ddavus
-
- Members
-
- 218 posts
Advanced Member
- LocationSouth Florida
-
Country: United States
Posted 22 November 2011 - 03:52 PM
I do do graphic arts, 3d modeling, and animation. Please send a list of desired work. I may have some spare time over the holidays.
#23
dankers
-
- Administrators
-
- 5124 posts
Janitor
-
Country:
Australia
Posted 24 November 2011 - 08:44 AM
I have asked the core guys to PM you with things they want doing, thank you so much for the offer of help!
#24
XXL-Wing
-
- Members
-
- 166 posts
Developer
- LocationVienna
-
Country:
Austria
Posted 03 January 2012 - 07:43 AM
Hi everybody!
My name is Mike and i am living in Vienna.
I have long-term experience in development of embedded systems software/hardware.
I am currently working as R&D Project Manager / Senior System Engineer at Thales Vienna (www.thalesgroup.com)
I have 20 years of experience in C/C++ embedded software development/design/architecture on various platforms, as well as experience in Java and UI coding(mainly Eclipse RCP).
I am using Netbeans or Eclipse but i am also very familiar with barebone coding using vim and friends.
As a development and work platform i prefer Linux.
As it comes to RC flying i have experience in Wing and Rotor models, i at the moment own a GAUI 500X Quadcopter, a TREX 450 SE V2, an Acrobat SE, a Jamara ROO-Jet and a Multiplex Acromaster.
I would like to start building and using OpenPilot for at least the Quadcopter, maybe for the Jet as well.
As i saw you are using the Atlassian tools (Jira, Crucible) for issue management and code review, i am familiar with them (even with administration) as we use them at work too.
So if i can be of any help for this project feel free to contact me, i would appreciate to contribute to this great project.
all the best
Mike
My name is Mike and i am living in Vienna.
I have long-term experience in development of embedded systems software/hardware.
I am currently working as R&D Project Manager / Senior System Engineer at Thales Vienna (www.thalesgroup.com)
I have 20 years of experience in C/C++ embedded software development/design/architecture on various platforms, as well as experience in Java and UI coding(mainly Eclipse RCP).
I am using Netbeans or Eclipse but i am also very familiar with barebone coding using vim and friends.
As a development and work platform i prefer Linux.
As it comes to RC flying i have experience in Wing and Rotor models, i at the moment own a GAUI 500X Quadcopter, a TREX 450 SE V2, an Acrobat SE, a Jamara ROO-Jet and a Multiplex Acromaster.
I would like to start building and using OpenPilot for at least the Quadcopter, maybe for the Jet as well.
As i saw you are using the Atlassian tools (Jira, Crucible) for issue management and code review, i am familiar with them (even with administration) as we use them at work too.
So if i can be of any help for this project feel free to contact me, i would appreciate to contribute to this great project.
all the best
Mike
Edited by XXL-Wing, 03 January 2012 - 07:44 AM.
No matter how good your backend systems are, the users will only remember your front end. Fail there and you will fail, period. -- Tristan Louis
Don't make me think. -- Steve Krug, usability expert
Don't make me think. -- Steve Krug, usability expert
#25
Reddog
-
- Members
-
- 1200 posts
UI Manager
-
Country: Australia
Posted 03 January 2012 - 08:21 AM
XXL-Wing, on 03 January 2012 - 07:43 AM, said:
Hi everybody!
My name is Mike and i am living in Vienna.
I have long-term experience in development of embedded systems software/hardware.
I am currently working as R&D Project Manager / Senior System Engineer at Thales Vienna (www.thalesgroup.com)
I have 20 years of experience in C/C++ embedded software development/design/architecture on various platforms, as well as experience in Java and UI coding(mainly Eclipse RCP).
I am using Netbeans or Eclipse but i am also very familiar with barebone coding using vim and friends.
As a development and work platform i prefer Linux.
As it comes to RC flying i have experience in Wing and Rotor models, i at the moment own a GAUI 500X Quadcopter, a TREX 450 SE V2, an Acrobat SE, a Jamara ROO-Jet and a Multiplex Acromaster.
I would like to start building and using OpenPilot for at least the Quadcopter, maybe for the Jet as well.
As i saw you are using the Atlassian tools (Jira, Crucible) for issue management and code review, i am familiar with them (even with administration) as we use them at work too.
So if i can be of any help for this project feel free to contact me, i would appreciate to contribute to this great project.
all the best
Mike
My name is Mike and i am living in Vienna.
I have long-term experience in development of embedded systems software/hardware.
I am currently working as R&D Project Manager / Senior System Engineer at Thales Vienna (www.thalesgroup.com)
I have 20 years of experience in C/C++ embedded software development/design/architecture on various platforms, as well as experience in Java and UI coding(mainly Eclipse RCP).
I am using Netbeans or Eclipse but i am also very familiar with barebone coding using vim and friends.
As a development and work platform i prefer Linux.
As it comes to RC flying i have experience in Wing and Rotor models, i at the moment own a GAUI 500X Quadcopter, a TREX 450 SE V2, an Acrobat SE, a Jamara ROO-Jet and a Multiplex Acromaster.
I would like to start building and using OpenPilot for at least the Quadcopter, maybe for the Jet as well.
As i saw you are using the Atlassian tools (Jira, Crucible) for issue management and code review, i am familiar with them (even with administration) as we use them at work too.
So if i can be of any help for this project feel free to contact me, i would appreciate to contribute to this great project.
all the best
Mike
Welcome to OpenPIlot, great to see you here, especially with all those wonderful skills of yours!
