Thanks
Solidworks Help
Started by metRo_, Mar 25 2012 02:20 PM
3 replies to this topic
#1
metRo_
-
- Members
-
- 543 posts
Key Member
- LocationAmarante (Porto)
-
Country:
Portugal
Posted 25 March 2012 - 02:20 PM
Hi, can anyone help me align the rectangle with the centerline in circunference? Or align the circunference so the centerline is horizontal, rotating the holes with it.
Thanks
Thanks
Feel free to correct my english, you can post or pm me, thanks
#2
K Wells
-
- Members
-
- 3220 posts
Key Member
- LocationTexas
-
Country:
United States
Posted 25 March 2012 - 03:10 PM
Select
http://help.solidworks.com/2012/English/eDrawings/Select.htm?id=929dc725dd7c41c69209a68b7ff6ee1e#Pg0
Move
http://help.solidworks.com/2012/English/edrawings/move.htm
Rotate
http://help.solidwor...ings/Rotate.htm
http://help.solidworks.com/2012/English/eDrawings/Select.htm?id=929dc725dd7c41c69209a68b7ff6ee1e#Pg0
Move
http://help.solidworks.com/2012/English/edrawings/move.htm
Rotate
http://help.solidwor...ings/Rotate.htm
Looking Forward to the Maiden
#3
metRo_
-
- Members
-
- 543 posts
Key Member
- LocationAmarante (Porto)
-
Country: Portugal
Posted 25 March 2012 - 03:26 PM
Select
http://help.solidwor...68b7ff6ee1e#Pg0
Move
http://help.solidwor...awings/move.htm
Rotate
http://help.solidwor...ings/Rotate.htm
Thanks but you these links are for eDrawing.
Feel free to correct my english, you can post or pm me, thanks
#4
metRo_
-
- Members
-
- 543 posts
Key Member
- LocationAmarante (Porto)
-
Country: Portugal
Posted 25 March 2012 - 03:38 PM
Done
I had a smartdimension blocking it
I had a smartdimension blocking it
Feel free to correct my english, you can post or pm me, thanks
